-40%

1960 BSA Starfire Scrambler 250cc - 3-Page Vintage Motorcycle Road Test Article

$ 7.89

Availability: 21 in stock
  • Item must be returned within: 30 Days
  • Restocking Fee: No
  • Refund will be given as: Money Back
  • Make: BSA
  • All returns accepted: Returns Accepted
  • Return shipping will be paid by: Seller

    Description

    1960 BSA Starfire Scrambler 250cc - 3-Page Vintage Motorcycle Road Test Article
    Original, vintage magazine article
    Page Size: Approx. 8" x 11" (21 cm x 28 cm)
    Condition: Good
    Jntroduced just this past December
    was the all new 1960 250cc Star fire
    Scrambler, a machine specifically de-
    signed for dirt competition or olt-the-
    road riding. Although the Starfire has
    had a relatively short exposure period
    on the market, it has already proved
    its reliability by constantly winning
    trophies in many of the major and
    minor events of this season. We feel
    that Hoad Tests should evaluate the
    record book. But also, and perhaps
    more important, they should point out
    the characteristics of test motorcycles
    which may further explain why they
    excel.
    The. Star fi re, unlike many other
    scrambler models, was not a change-
    over from a previously manufactured
    road machine. Thus, being conceived
    for scrambling, it is important to bear
    in mind that the Starfire is a mono-
    purpose breed.
    On first glance, the Starfire looks as
    if the frame and forks were designed
    for a much larger capacity engine.
    Actually the appearance is not deceiv-
    ing as the telescopic front forks are
    the same diameter as the BSA Gold
    Star. The heavy tubular frame has a
    cradle - type engine support that is
    covered with a 16th of an inch steel
    skid plate. This plate clears the
    ground by 8 inches and is excellent
    protection for the type of use the Star-
    fire is built to experience.
    Sitting astride the bike, it continues
    to have a feeling of bigness. The seal
    height is 31 inches. Front wheel
    measures 20 inches in diameter and
    the rear 19 inches. Wheelbase is 51
    inches.
    Shifting is performed via a short
    action foot lever located on the right
    side of the crankcase. At first we
    thought that the lever was a bit short
    but it proved easy to operate and
    snapped into each of the four gears
    with a positive sounding click, even
    over rough country and without the
    help of the clutch. Neutral is in the
    normal place, between first and sec-
    ond.
    Firing up the single cylinder 250cc
    engine required a little extra effort—
    more than we expected. We were
    forced to remember al this point that
    compression ratio is 9.5 to 1 and cur-
    rent is fed to the spark plugs without
    the help of a battery, as an A.C. gen-
    erator with direct ignition and light-
    ing is installed. Again, this is a ma-
    chine not used for stop and go citv
    12783-AL-6007-04