1962 BSA SUPER ROCKET

Description

1962 SUPER ROCKET IN PARTS. THE ENGINE, FRAME AND TRANSMISSION ARE ORGINAL WITH EACH OTHER AND I HAVE A TITLE WITH THE BIKE.
THE TRANSMISSION IS (STD) AND IN UNMOLESTED NICE CONDITION. THIS WAS GOING TO BE MY ROCKET GOLDSTAR PROJECT BIKE. I HAVE THE "RARE" TWIN CARB ROCKET GOLDSTAR HEAD. THERE ARE NO VALVES, OR SPRINGS. THE HEAD IS PRIME AND ALL THE FINS ARE INTACT. THE TWO MANIFOLDS ARE CORRECT ORGINAL LEFT AND RIGHT PIECES, SPECIFICALLY FOR THE ROCKET GOLDSTAR HEAD.
I HAVE BOTH THE SUPER ROCKET SWING ARM AND THE CORRECT ROCKET GOLDSTAR SWING ARM. I HAVE A 4.5 GALLON BURTON REPRODUCTION TANK (FROM TAIWAN) IN GREAT NEAR NEW CONDITION. I ALSO HAVE THE CORRECT SUPER ROCKET TANK IF THAT IS WHAT YOU WANT. I HAVE THE SUPER ROCKET BRAKE PEDAL AND THE ROCKET GOLDSTAR BRAKE PEDAL. I HAVE THE ENGINE AND TRANSMISSION MOUNTING PLATES. I HAVE THE CORRECT GENERATOR COVERS. I DO NOT HAVE A GENERATOR. I HAVE THE CORRECT MAGNETO FOR THE MOTOR. I HAVE A CLUTCH BASKET, CHAIN AND THE FRONT DRIVE SHAFT SPROCKET WITH ALL THE CORRECT PARTS TO GO ALONG WITH IT. I HAVE ALL THE PRIMARY GEARS, CHAINS, OIL PUMP, ETC. I HAVE THE TIMING COVER AND THE INNER AND OUTER PRIMARY COVERS. I HAVE MANY BOLTS TO GO WITH THE MOTOR. THE CRANK IS VERY NICE AND HAVE MATCHING NUMBER RODS MOUNTED TO GO ALONG WITH IT. THE BARREL IS IN GREAT CONDITION WITH NO BROKEN FINS. A SET OF MATCHING PISTONS GO WITH THE BARREL. THE CORRECT GOLDSTAR FRONT FORKS GO WITH THE BIKE. I HAVE A GOOD CAM TO GO WITH THE MOTOR ALSO. THE OIL TANK AND THE TOOL BOX GO WITH THE BIKE. I HAVE THE BATTERY BOX AND THE TIN PIECE THAT GOES BEHIND THE HEAD AND FRONT OF THE TRANSMISSION.
I DO NOT HAVE ANY FENDERS, OR STAYS. I DO NOT HAVE THE FRONT WHEEL, HUB, RIM OR THE BACK WHEEL, HUB, RIM. I DO NOT HAVE A SEAT OR REAR TAIL LIGHT. I HAVE NO HEADLIGHT, NO GUAGES. I DO NOT HAVE ANY MUFFLERS. I DO NOT HAVE A CENTER STAND, OR SIDE STAND. THERE IS NO WIRING HARNESS. I DO NOT HAVE THE REAR BRAKE SET UP. I DO NOT HAVE THE FOOT RESTS. THERE WAS A SLIGHT EXTERNAL CRACK ON THE FRONT MOTOR MOUNT THAT WAS WELDED. IT DID NOT INTRUDE INTO THE INSIDE OF THE CASE. THIS IS NOT THE RESULT OF A THROWN ROD PROBLEM. THE TIN GENERATOR COVER WILL HIDE ANY WELD SIGNATURE. I TRY TO BE AS HONEST AS POSSIBLE TO BE YOUR EYES. THERE WILL BE MISC BOLTS, NUTS MISSING AS IS THE CASE WITH A BIKE THAT WAS TAKEN APART TO SELL BY MACK 1V MOTORS. IF YOU HAVE ANY OTHER QUESTIONS, OR NEED ADDITIONAL PICTURES, JUST ASK. THIS BIKE WILL MAKE A BEAUTIFUL ROCKET GOLDSTAR REPLICA, FOR A FRACTION OF THE PRICE. I AM SELLING THIS AS ONE UNIT, WHICH WILL NOT BRING ME AS MUCH MONEY AS IF I WERE TO SELL EACH PART SEPARATELY. WHEN YOU COMMIT TO BUY, PLEASE DO NOT PAY UNTIL I CALULATE THE SHIPPING COSTS. I WILL INVOICE YOU FOR THE PARTS AND SHIPPING COSTS, THEN YOU PAY. I WILL PACK THE PARTS CAREFULLY IN A VERY LARGE BOX AND SHIP MOUNTED ON A PALLET FOR TRUCK SHIPPING. THE DELIVERY TRUCK WILL HAVE A LIFT GATE TO LOWER THE PARTS TO THE GROUND. FREIGHT COSTS DEPEND ON WHERE YOU LIVE RELATIVE TO MY LOCATION. GOOD LUCK.