6W FM 88-108MHz 140-170MHz power amplifier (finished product)

Description

6W FM 88-108MHz 140-170MHz power amplifier (finished product)
Welding and debugging with a radiator, the default version is 88-108MHz, if you need the 140-170MHz version, please specify!
The high-frequency power amplifier amplifier must be connected to the nominal load and then powered on (our store's power amplifier product defaults to 50 ohms), such as a suitable antenna, this is very important!
Note: Be sure to connect a serious antenna (that is, use a coaxial cable to connect to the outdoor, the antenna is GP or J-shaped. Never use a rod antenna directly connected to the output port, this will not work properly, remember to remember And the antenna should resonate at the operating frequency, and the standing wave cannot exceed 1.5.
Working frequency range:
140-170MHz
88-108MHz
Note: You can only choose to work at 88-108MHz or 140-170MHz, and the two frequency bands cannot exist on the same board.
Input: not less than 0.5W
Output: 6W
Typical gain: 10dB
Maximum gain: 11dB
Power supply voltage: 12V (15V Max)
Working current: 1-1.5A
Size: 8x4cm (excluding protrusions)
Weight 97g (including radiator)
Weight 18g (excluding radiator)
Packing: 1PC
Warranty period: 120 days
On Apr-16-20 at 19:19:03 PDT, seller added the following information: