-40%
Digital IRS2092 IRS2092S L15DSMD CLASS D Mono Channel Audio Amplifier Amp Board
$ 8.44
- Description
- Size Guide
Description
Visit storeItems for sale
About us
Product Details
Description:
IRS2092 Amplifier Board 200W
100% brand new and high quality
Using original IRS2092, IRFI4019
Electrolytic capacitor signal main circuit using international brands, the main filter capacitor using a Nikon capacity 330UF/100V * 2, to ensure strong support for a steady stream of power
Resistance selection 08,050,603 high precision chip resistors, ensure the machine a good signal to noise ratio
1.6mm thick sheet using double-sided PCB, 2.0 oz copper thickness, HASL whole process to ensure that the size of the current through the good performance. PCB-class quality
Using 20A high current shielded inductor, ensuring crisp and powerful sound
Very small size, big power
Basic performance parameters:
Work: Class D
Quiescent Current: 20mA
Efficiency: 90%
Rated Output Power: 200W
Frequency Response: 20Hz to 20KHz
Operating Voltage: +-30V to +-60V
Recommended Supply Voltage: +-50V
Maximum Output Current: 8A
PCB Size: 86 * 57mm/3.38*2.24"
Package Included:
1PC*
IRS2092 200W Class D Mono Amplifier Board
IRS2092S Amplifier Board 250W
Working voltage: DC + -50V( between + - 33V to + - 55V )
+ -50V OUTPUT =125W 8R RMS. 250W 4R RMS
size:110MM*58MM*42MM
net weight:120g
Distortion: 0.007 % THD+N @ 60W, 4Ω
Voltage Gain 36
Load Impedance : 4Ω
Total Idle Power Consumption: 7W
Channel Efficiency : 90% 250W 4Ω
Dynamic Range : 101 DB
Residual Noise : 200UV
Frequency Response :20HZ-35K HZ + -3DB
Thermal Performance: 30W ,55C degree
250W ,90C degree
IRAUDAMP7S instruction
Applications
AV receivers
Home theater systems
Mini component stereos
Powered speakers
Sub-woofers
Musical Instrument amplifiers
Automotive amplifiers
Features
Output Power: Scalable output power from 25W- 500W (see Table 1)
Residual Noise: 200 μV, IHF-A weighted, AES-17 filter
Distortion: 0.007 % THD+N @ 60W, 4 R
Multiple Protection Features: Over-current protection (OCP), high side and low side MOSFET
Over-voltage protection (OVP),
Under-voltage protection (UVP), high side and low side MOSFET
DC-protection (DCP),
Over-temperature protection (OTP)
PWM topology: Self-oscillating PWM, half-bridge or full-bridge topologies selectable
Note:
Recommendations of the working voltage, and power transformers.
8 ohms load transformer voltage AC dual 40V, + -DC 55V, power 150W sound track. 300W two-channel. Filter capacitor 6800UF * 2 or more
4 ohm load transformer voltage AC dual 35V, + -DC 48V power 250W sound track. 500W two-channel. Filter capacitor 10000UF * 2 or more
4 ohm load + -58V DC, 300W 4R mono power. 700W two-channel power. Recommendation transformer voltage AC dual 41V 1000W.
Package Included:
1PC*IRS2092S 250W Mono Digital Amplifier AMP Board
IRS2092S Amplifier Board 500W
This is pure power amplifier board, the sensitivity of the input signal of 1.5V rms, if your input signal voltage can't reach this value,recommend add preamp.
Mono channel,for 2.0 channel need bid two.
Parameters:
1. Power supply: dual DC power supply ± 58 --- ± 70V
2. The rated output power: 500W (± 65V power supply, 4 ohm load, distortion 10%)
3. Efficiency:> = 90%
4. SNR: 90dB
5. The total harmonic distortion:
380W (± 65 power 4 ohm speaker, distortion <0.1%)
280W (± 65 power 8 ohm speaker, distortion <0.1%)
6. Frequency range: 20Hz-20KHz
7. Speaker: 4-8Ω
8. Voltage Magnification: 36 times
9. Input sensitivity 1.5V (RMS)
10. Output short circuit protection: Yes
11. That output DC bias protection speaker protection: Yes
12. Over-temperature protection: Yes, radiator FET temperature higher than 100 ° C, turn off the output!
13. Amplifier board size: length x width x height = 98x43x30mm
14. Weight: 95 g
Use precautions:
1. Rated supply voltage is ±65V, ±58---±70V range, do not over 70V! positive and negative do not pick wrong
2. Recommended power supply ±65V
3. Recommended 4-8Ω / 10-18inch speaker
4. Carefully check before electricity, ensure the wiring is correct.
Package Included:
1PC*IRS2092S 500W Mono Digital Amplifier AMP Board
Payment Method
Shipping Policy
Returns & Refund Policy
Feedback
Payment Method
EBAY Managed Payment.
But we only
Accept
your
Ebay Address
, please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping Policy
1. We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3. All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
Returns & Refund Policy
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please keep in touch with us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
Feedback
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.